Intex Rubber & Specialty
"Providing Sealing Solutions Since 1984"
oxidation and sunlight resistance.

Material: Chloroprene

Color: Black

Characteristics:
Good weather-resistance
Moderate resistance to petroleum-based fluids
Good physical properties.

•  Available in full rolls - see sizes below
•  Available in sheets
•  Can be supplied in cut-to-width strips
•  Pressure sensitive adhesive backing is also available

Operating Temperature: -20 °F to +180 °F

Finish: Smooth
Neoprene Rubber Gasket
1/16" x 36"
$4.16
1/8" x 36"
$7.02
3/16" x  36"
$11.66
1/4" x 36"
$17.70
3/8" x 36"
$30.76
1/2" x 36"
$40.40
1/16" x 48"
$5.57
1/8" x 48"
$10.64
3/16" x 48"
$15.62
1/4" x 48"
$23.72
3/8" x 48"
$41.22
1/2" x 48"
$54.14
Red Rubber (SBR)
Red Rubber is a general service SBR rubber compound
of excellent quality. This heat resistant material has been
calendared and vulcanized under the strictest control.

Material: Styrene Butadiene - Buna S - GRS

Color: Red
Characteristics:

Popular flange gasket material for hot or cold water, air
and steam (not exceeding 100 PSI). All mating flanges
wherever a quality rubber sheet is required. Remarks:
Deforms to uneven flanges.

•  Available in full rolls - see sizes below
•  Available in sheets
•  Can be supplied in cut-to-width strips

Operating Temperatures: -22 °F to 158 °F
★ Pricing Reflects Per Foot Measurements
1/16" x 36"
$4.14
1/8" x 36"
$7.20
3/16" x 36"
$12.29
1/4" x 36"
$14.47
1/16" x 48"
$5.55
1/8" x 48"
$9.64
3/16" x 48"
$16.47
1/4" x 48"
$19.39
★ Pricing Reflects Per Foot Measurements
★ Pricing Reflects Per Foot Measurements
Nitrile (Buna-N) Rubber
Nitrile Rubber Buna-n Rubber
Description:
Nitrile (i.e. Buna-N) sheet Rubber  is good
oil & grease, as well as moderate ozone
resistance is needed.  Good resistance to
most industrial & commercial oils and
grease products.   

Applications:
For use as bumpers, pads, sealing and
general gasket applications.  

Not recommended for severe ozone-
resistant applications.  

Compound: Nitrile (NBR), SBR, CR

Color:  Black  

Temperature Range:
-20 F to 180 F  

Minimum Tensile:
725 PSI or 5 MPA
1/16" x 36"
$5.49
1/8" x 36"
$11.74
3/16" x 36"
$19.59
1/4" x 36"
$23.26
1/16" x 48"
$7.36
1/8" x 48"
$15.73
3/16" x 48"
$26.25
1/4" x 48"
$31.16
Need more info on a product?

Please call at 800-468-9937 or e-mail to
intexrubber@ yahoo.com

We are happy to help!